Skip to content

Add bleed and crop marks to PDF

Extend artwork into a 3 mm or 0.125 in print bleed with vector TrimBox, BleedBox, crop marks, and registration targets.

Drop a PDF to add print bleed and crop marks

Keeps fonts and artwork in crisp vector Form XObjects.

Your files are open only in this tab. Nothing is uploaded.

How to use Add bleed to PDF

  1. Load your print file. Drop any PDF brochure, flyer, book interior, or cover onto the upload panel or click Choose PDF.
  2. Pick bleed width and edge behavior. Choose 3 mm (EU/UK), 5 mm, 0.125 in (KDP), or Custom (mm), then select Mirror edge reflect, Scale artwork up, or White margin.
  3. Configure press marks and page range. Toggle Add corner crop marks outside BleedBox or Add registration bullseye targets, and optionally restrict pages under Page range.
  4. Export the press-ready file. Click Add bleed, check the TrimBox, BleedBox, and MediaBox readout in millimetres, and download the vector PDF.

Your files are processed on this device and never uploaded. They stay private, and there's nothing to delete afterwards.

How does vector PDF bleed extend artwork without rasterizing?

Instead of rendering pages into bitmaps, this tool embeds each source page as a reusable vector Form XObject inside @cantoo/pdf-lib and draws reflected or scaled boundary strips using PDF graphic-state clipping paths. All processing stays inside your browser Web Worker with zero remote file transfers.

Embedding pages as Form XObjects with clipping masks

PDF geometry uses PostScript units equal to 72 pt per inch (25.4 mm). Under the PDF Association ISO 32000-2 (PDF 2.0) standard, Form XObjects store self-contained vector graphics streams so you can add bleed to PDF pages without duplicating fonts or line art.

With Mirror edge reflect, the builder places each page at 1:1 scale inside TrimBox and attaches clipped affine reflection matrices ([-1, 0, 0, 1] horizontally, [1, 0, 0, -1] vertically) across four edges and corners. Source /Rotate tags normalize upright before reflection.

Choosing 3 mm EU/UK, 5 mm, or 0.125 in KDP widths

Commercial guillotines shift slightly during binding, so full-bleed backgrounds must extend beyond the cut line. Click 3 mm (EU/UK) (8.504 pt) for European presses, 5 mm (14.173 pt) for packaging, or 0.125 in (KDP) (9 pt) for North American printers.

Choosing Custom (mm) lets you set values from 0.5 mm (1.4 pt) upward. The browser worker enforces an upper safety limit of 72 pt (25.4 mm) so page geometry stays valid across RIP software.

Understanding TrimBox, BleedBox, and MediaBox dimensions

Print RIP engines inspect nested page geometry boxes rather than guessing from visible artwork edges. Per the Library of Congress PDF/X format description, commercial prepress workflows rely on exact TrimBox and BleedBox bounds.

PDF page box or mark Purpose in commercial print prepress Coordinate formula (b = bleedPt, s = slugPt) Example for A5 (148 × 210 mm) + 3 mm bleed + marks
TrimBox Exact finished size after cutting trimW × trimH inset by s + b 148.0 × 210.0 mm (419.5 × 595.3 pt)
BleedBox Outer limit of full-bleed ink (trimW + 2b) × (trimH + 2b) 154.0 × 216.0 mm (436.5 × 612.3 pt)
CropBox Visible frame in PDF viewers Matches MediaBox (0, 0, mediaW, mediaH) 166.7 × 228.7 mm (472.5 × 648.3 pt)
MediaBox Full sheet with outer mark slug (bleedW + 2s) × (bleedH + 2s) (s = 18 or 0) 166.7 × 228.7 mm with slug (s = 18 pt)
Corner crop marks 0.35 pt cut guides outside bleed Start at b + 3 pt, end at b + 16 pt Four corner pairs pointing to TrimBox
Registration targets 3.5 pt circle + 5.5 pt crosshairs Centered at s / 2 (9 pt) along 4 edges Centered inside the 18 pt slug

Disabling both Add corner crop marks outside BleedBox and Add registration bullseye targets collapses slugPt to 0 pt, matching KDP requirements for trim-and-bleed-only interiors. Offset presses usually prefer an 18 pt outer slug carrying trim guides.

If you are stripping wide white margins off textbooks for portable displays instead of printing, do not expand boxes outward. Switch to Crop PDF for Kindle to trim dead whitespace safely.

Mirror edge reflect vs Scale artwork up vs White margin

Selecting the right Edge extension method avoids distorted margins and clipped headlines when fixing white borders on flyers. Compare how each mode handles artwork scale, borders, and press marks before exporting.

When edge reflection works cleanly vs uniform scaling

Mirror edge reflect preserves your center layout at 100% scale, keeping captions and logos safe near trim edges. Only the outer 3 mm or 0.125 in border reflects across solid backgrounds, gradients, and textures.

By contrast, Scale artwork up applies uniform magnification (Math.max(bleedW / trimW, bleedH / trimH)), suited to wide-margin posters. White margin keeps 1:1 artwork inside TrimBox with blank BleedBox padding, while keep interactive widgets static before press proofing flattens comments or form fields first.

Adding corner crop marks and registration targets

Under the W3C CSS Paged Media Module Level 3 model, crop ticks mark final trims while targets align ink plates. Add corner crop marks outside BleedBox draws eight 0.35 pt ticks starting 3 pt beyond BleedBox.

Toggling Add registration bullseye targets adds four 3.5 pt circles overlaid with 5.5 pt crosshairs along the 18 pt slug. Placing them at page midpoints lets press operators inspect color registration immediately.

Selective page bleed and troubleshooting preflight warnings

Adding print bleed selectively avoids unnecessary box edits on text leaves or dividers. Type page numbers inside Page range (optional) and inspect edge behavior on preview cards.

Adding bleed only to covers via Page range

Type indices or ranges like 1 or 1-2, 24 in Page range (optional) to expand only full-bleed covers or photo spreads. Unselected pages copy unchanged via copyPages, keeping original box dimensions intact.

After clicking Add bleed, inspect the TrimBox (final cut), BleedBox (with bleed), and MediaBox (outer slug) values in millimetres below the download card. Confirming all three numbers catches wrong paper presets immediately.

Tip: Avoid running Mirror edge reflect on pages with thin border frames or page numbers touching the trim edge, because reflection duplicates those lines outside the cut mark.

Avoiding clipped text and double-bleed scaling errors

If your source PDF already carries 3 mm bleed plus crop marks, running Add bleed twice mirrors old ticks into the outer slug. Inspect page 1 in the preview first, and skip extra bleed if marks already sit outside the artwork.

Once dimensions and press marks pass preflight checks, finalize document tags before delivery. Open the PDF title and author metadata editor to populate title, author, and subject metadata before export.

Questions

Does adding mirror bleed rasterize PDF fonts or vector artwork?

No. Each selected page is embedded as an upright vector Form XObject via @cantoo/pdf-lib and clipped around the trim edge. Fonts, hairline rules, barcodes, and vector logos remain crisp vector paths.

What is the difference between TrimBox, BleedBox, and MediaBox?

TrimBox defines the final cut size after guillotining, BleedBox expands outward by your bleed margin on all four edges, and MediaBox covers the full sheet including the 18 pt outer slug when crop or registration marks are enabled.

Should I use 3 mm or 0.125 inch bleed for Amazon KDP and EU printers?

Choose 0.125 in (KDP), which equals 9 PostScript points or 3.175 mm, for Amazon KDP, IngramSpark, and North American print shops. Choose 3 mm (8.504 pt) or 5 mm for standard European and UK litho or digital presses.

When is Mirror edge reflect better than Scale artwork up?

Use Mirror edge reflect whenever your artwork already sits at exact final trim dimensions with background gradients or edge photos. Choose Scale artwork up only when borders have generous inner safe margins and slight magnification will not crowd edge text.

Why does MediaBox grow larger when corner crop marks are turned on?

Enabling Add corner crop marks outside BleedBox or Add registration bullseye targets adds an 18 pt (6.35 mm) slug around BleedBox on all four sides. That outer margin ensures trim ticks and registration targets never collide with live bleed artwork.

Can I add print bleed to cover pages without altering interior pages?

Yes. Enter specific page numbers such as 1 or 1, 24 inside Page range (optional) before exporting. Pages omitted from that range pass through unchanged at their original dimensions.

Updated