Skip to content

Audio speed and pitch changer

Speed up voice memos, slow down language practice, or shift musical key independently inside your browser without uploading audio.

Your files are open only in this tab. Nothing is uploaded.

Source audio

Time-stretch speech or transpose musical tracks locally using WSOLA synthesis.

Drop an audio file here

MP3, WAV, M4A, OGG, or FLAC processed locally.

How to use Audio speed & pitch changer

  1. Load an audio track. Drop a WAV, MP3, M4A, OGG, FLAC, or WebM file onto Drop an audio file here, or click Load sample voice clip to test sample-voice.wav.
  2. Set tempo and semitone targets. Click a speed preset from 0.75x to 2.0x or drag Playback speed between 0.50x and 2.50x, and optionally shift Pitch shift (semitones) from -12 st to +12 st.
  3. Toggle pitch lock and render. Keep Preserve pitch independently when changing speed (WSOLA time-stretch) checked for natural voices, or uncheck it for tape varispeed, then click Apply speed & pitch.
  4. Save the rendered file. Audition the waveform player and click Download .wav for uncompressed 16-bit PCM, or choose Download .m4a or Download .webm where WebCodecs is available.

Your camera, microphone and recordings stay on this device. Nothing is uploaded or streamed anywhere.

How does WSOLA change audio speed without shifting pitch?

Waveform Similarity Overlap-Add (WSOLA) decouples playback duration from vocal pitch by splicing overlapping 40 ms audio grains rather than changing the playback sample rate. Searching within a local +/- 10 ms tolerance window aligns adjacent waveform phases before blending them, keeping voices natural across 0.5x to 2.5x speeds.

Splicing 40 ms Hann windows with overlap-add correlation

After your browser decodes compressed tracks under the W3C Web Audio API 1.1 Specification, the worker receives planar Float32Array channels. WSOLA builds a periodic Hann window around 40 ms long (50% overlap hop) and normalizes each sample against the summed window curve.

At every synthesis step, the engine evaluates candidate offsets within +/- 10 ms around the target timeline position. Picking the peak normalized cross-correlation against the prior grain keeps harmonic periods aligned, avoiding hollow phase cancellations. If your source lecture still contains long gaps, strip awkward pauses from lectures beforehand for tighter pacing.

Unchecking pitch lock for classic varispeed resampling

Clearing Preserve pitch independently when changing speed (WSOLA time-stretch) bypasses overlap-add splicing entirely. Instead, the worker multiplies your chosen Playback speed by the semitone ratio and runs single-pass cubic Catmull-Rom interpolation across every channel.

Varispeed coupling behaves exactly like speeding up or slowing down analog tape. Raising speed to 2.0x halves duration and raises pitch by one full octave (+12 semitones), while eliminating overlap-add grain boundaries on percussive synth loops or drum stems.

Transposing musical keys from -12 to +12 semitones

Musicians practicing difficult guitar solos or vocalists adapting karaoke backing tracks often need exact half-step key shifts without changing song BPM. Moving Pitch shift (semitones) scales musical frequency by 2^(semitones / 12) across one octave downward (-12 st) to one octave upward (+12 st).

Combining cubic Catmull-Rom resampling with time-stretching

Because channel arrays read from an MDN Web Audio AudioBuffer interface contain raw floating-point PCM amplitudes, shifting key at constant tempo uses a clean two-step pipeline. First, WSOLA stretches or compresses the clip by pitchRatio / speed so its intermediate length compensates for resampling.

Second, 4-point Catmull-Rom cubic interpolation resamples the stretched buffer by pitchRatio, shifting pitch smoothly while landing on the exact target duration. Before transposing a full rehearsal track, you can also extract just the chorus loop using our Audio Cutter & Trimmer.

Using quick speed presets for study and transcription

Six quick preset buttons (0.75x, 0.9x, 1.0x, 1.25x, 1.5x, and 2.0x) sit right beside the track header for rapid auditioning. Clicking any preset updates Playback speed immediately and re-renders the 160-bar Processed audio waveform inside everyday.worker.ts.

Dragging Playback speed adjusts your speed multiplier in 0.05x steps from 0.50x up to 2.50x, while clicking Apply speed & pitch commits slider adjustments together. Output filenames automatically embed your parameters, such as -1.25x-minus2st.wav, so multiple practice versions never overwrite each other.

Choosing independent pitch lock versus coupled varispeed depends on your audio goal, such as accelerating spoken narration, transcribing fast solos, or shifting vocal ranges. Standard mobile playback containers like those described in the Library of Congress MPEG-4 AAC format guide preserve these rendered tempos across phones and tablets.

Audio task Playback speed Pitch shift WSOLA pitch lock Practical result
Podcast or lecture review 1.25x to 1.75x 0 st Checked (On) Cuts listening time without chipmunk voices
Language or dictation drill 0.75x to 0.90x 0 st Checked (On) Slows rapid consonants while keeping natural tone
Guitar or vocal key transpose 1.00x -4 st to +4 st Checked (On) Changes musical key while locking original BPM
Complex music transcription 0.75x 0 st Checked (On) Reveals fast fingerings at original tuning
Lo-fi slowed or sped effect 0.85x or 1.15x 0 st Unchecked (Off) Shifts pitch and tempo together like analog tape

Musicians matching an instrument tuning reference after transposing a backing track can pair exported clips with reference musical pitch tuning tones in the same session. Always audition short percussive sections when pushing speed past 2.0x so drum transients remain crisp.

Tip: Click Load sample voice clip to audition sample-voice.wav at the default 1.25x speed first, then compare checking and unchecking Preserve pitch independently when changing speed (WSOLA time-stretch) at 1.5x to hear phase alignment firsthand.

Exporting permanent WAV, M4A, and WebM audio offline

Unlike browser extensions that only alter playback speed temporarily inside an HTML media element, every render here generates fresh PCM samples. Downloading exports an independent audio file that opens at your new tempo and key in any desktop editor or phone player.

Encoding 16-bit WAV alongside WebCodecs AAC and Opus

Clicking Download .wav packages lossless 16-bit RIFF PCM samples directly from the worker buffer at your source sample rate (4,000 Hz to 192,000 Hz). In browsers supporting WebCodecs AudioEncoder, Download .m4a (128 kbps AAC) and Download .webm buttons also appear.

WebCodecs encodes WebM streams using the IETF RFC 6716 Opus audio codec, automatically resampling PCM audio to 48,000 Hz prior to muxing. Choose WAV to export uncompressed masters for studio DAWs, or pick M4A and WebM to keep mobile downloads compact.

Processing private rehearsals and lectures in client RAM

Confidential client interviews, unpublished band demos, and recorded university seminars remain strictly inside browser RAM from drop to download. Because everyday.worker.ts runs all WSOLA correlation loops off the UI thread, long clips process smoothly without stalling page scrolling.

Students pairing dense reading assignments with custom-paced spoken recordings can also listen to document narrations offline at custom speed or bring recorded lecture audio straight into this tab. When you close the browser tab, object URLs revoke automatically and leave zero temporary copies behind.

Questions

How does speed change without making voices sound higher or lower?

Enabling Preserve pitch independently when changing speed runs Waveform Similarity Overlap-Add (WSOLA) synthesis inside the background worker. Instead of altering the sample rate, WSOLA duplicates or skips 40 ms waveform cycles at points of maximum cross-correlation so vocal pitch stays unchanged.

Can I transpose a song without altering its BPM tempo?

Yes. Leave Playback speed at 1.00x with the pitch-preservation checkbox ticked, then move Pitch shift (semitones) anywhere between -12 st and +12 st. The engine stretches duration by the inverse pitch factor first, then resamples back to your original song length.

Are exported tempo and pitch changes permanent in the downloaded file?

Yes. Every click on Apply speed & pitch renders brand-new PCM samples inside the worker rather than just toggling a browser player speed tag. Downloaded WAV, M4A, and WebM files retain the new tempo and key in every external player.

When should I turn off WSOLA pitch lock for varispeed audio?

Uncheck WSOLA pitch lock when you want classic vinyl turntable or analog tape speed shifts, or when matching 1.059x semitone-coupled resampling with zero window-splicing artifacts. Disabling pitch lock uses single-pass Catmull-Rom cubic interpolation across speed and semitones together.

Which audio formats and speed ranges are supported offline?

You can load any MP3, WAV, M4A, OGG, FLAC, or WebM track that your browser decodes between 4,000 Hz and 192,000 Hz. Interface controls cover 0.50x to 2.50x speed in 0.05x steps and -12 to +12 semitones.

Why do extreme pitch shifts or 2.5x speeds sometimes sound slightly grainy?

Time-domain WSOLA repeats or omits overlapping 40 ms grains to preserve pitch, which can soften sharp percussive transients at extreme ratios. Keeping voice speed changes between 0.75x and 1.75x and transpositions within +/- 5 semitones keeps speech and instruments clean.

Updated