Skip to content

Audio tag, cover art, and bitrate inspector

Inspect, edit, or wipe audio tags and embedded album artwork locally while checking real high-frequency bandwidth.

Your files are open only in this tab. Nothing is uploaded.

Audio file

Inspect ID3v2, Vorbis Comment, RIFF INFO, and M4A tags, swap cover art, and check true frequency bandwidth.

Drop an audio track here

MP3, FLAC, WAV, and M4A containers parsed locally on this device.

How to use Audio metadata editor

  1. Load an audio file. Drop an MP3, FLAC, WAV, or M4A recording onto Drop an audio track here, or click Load sample tagged MP3 to inspect a built-in 192 kbps track.
  2. Inspect codec, bitrate, sample rate, and cutoff frequency. Check Sample rate, Bitrate mode, and the 64-bin FFT graph to see if high frequencies roll off early or extend near Nyquist.
  3. Edit tags or swap cover art. Update Title, Artist, Album, Album artist, Year, Track, Genre, or Comment, and click Replace cover art to attach a PNG or JPEG cover.
  4. Save or wipe metadata locally without uploads. Click Save updated tags to download a tagged MP3, FLAC, or WAV file, or click Strip all metadata to export a clean copy.

Your camera, microphone and recordings stay on this device. Nothing is uploaded or streamed anywhere.

Editing ID3v2, Vorbis comments, and RIFF INFO tags

Maintaining clean music libraries, podcast feeds, and sound-effect stems starts with an accurate audio metadata editor running inside browser memory. Dropping an MP3, FLAC, WAV, or M4A file reveals technical stream headers alongside eight editable fields without sending private recordings across the network.

Writing UTF-16 ID3v2.3 frames and cover art on MP3

Under the Library of Congress MP3 File Format description, MPEG-1 and MPEG-2 Layer III bitstreams often carry leading ID3v2 headers and trailing 128 bytes of ID3v1 footer data. Clicking Load sample tagged MP3 builds a 44,100 Hz Joint Stereo clip at 192 kbps to preview full tag parsing immediately.

When you click Save updated tags, the worker strips stale ID3v1 and ID3v2 blocks and writes one clean ID3v2.3 header using synchsafe 32 bits of size telemetry. Every text tag encodes as UTF-16 LE with a byte-order mark (0x01) while storing notes under an eng COMM frame.

Updating FLAC Vorbis comments and WAV RIFF chunks

FLAC streams store audio specs inside a 34 bytes long STREAMINFO block and UTF-8 KEY=value fields inside a VORBIS_COMMENT metadata block. Saving edits preserves structural blocks such as SEEKTABLE and CUESHEET, drops PADDING blocks, and copies raw compressed audio frames unmodified.

WAV files store Title, Artist, Album, Album artist, Year, Track, Genre, and Comment inside a LIST/INFO chunk padded to 2 bytes and omit non-standard id3 chunks. If your project tracks video clips alongside audio stems, inspect video container metadata and GPS in the matching inspector.

How does FFT frequency cutoff detect fake lossless audio?

Lossy encoders like low-bitrate MP3 and AAC discard ultrasonic frequencies above a steep low-pass shelf around 15 kHz to 18 kHz to save storage space. Transcoding a 128 kbps MP3 into FLAC cannot restore missing harmonics. A local 2048-point FFT exposes that artificial cutoff shelf immediately against Nyquist.

Running 2048-point Hann-windowed FFT across active frames

After inspecting container bytes, the browser decodes compressed tracks into floating-point PCM channels using the MDN BaseAudioContext decodeAudioData documentation and mixes multi-channel audio to mono. Up to 24 active frames, selected above 10% of peak RMS, receive a 2048-point Hann window before Cooley-Tukey radix-2 FFT processing.

Averaging power spectra across those active frames reduces transient noise spikes and compares upper bins against the 200 Hz to 4000 Hz core speech and music band. A sliding 280 Hz window walks downward from Nyquist until energy exceeds minus 42 dB relative to the reference band.

Reading the 64-bin spectrum graph and Nyquist shelf

The True bitrate / spectral cutoff analyzer plots 64 dB bars from -96 dB up to peak energy and marks the cutoff with a dashed red line. Tracks extending past 18 kHz or 92% of Nyquist show full-bandwidth status without an artificial compression shelf.

Lower cutoffs around 15 kHz or 16 kHz indicate lossy upscales, while synthetic test frames that fail browser decoding skip spectral graphs cleanly without blocking tag edits. Once a track passes frequency checks, open Normalize audio volume locally to match streaming loudness targets cleanly.

Audio container tag, artwork, and stripping matrix

Container formats follow different binary rules for text frames, embedded images, and chunk offsets. Reviewing container support in the Xiph.org FLAC format specification alongside MP3, WAV, and M4A behavior clarifies which tracks accept edits versus read-only inspection and lossless stripping.

Container format Metadata structure Editable text tags Embedded artwork Lossless metadata strip
MP3 (.mp3) ID3v2.2, ID3v2.3, ID3v2.4, ID3v1 Writes UTF-16 ID3v2.3 frames Reads & writes APIC PNG/JPEG Removes leading ID3v2 and 128 bytes ID3v1
FLAC (.flac) STREAMINFO, VORBIS_COMMENT, PICTURE Writes UTF-8 Vorbis comments Reads & writes type 3 PICTURE Strips comments, padding, and pictures
WAV (.wav) RIFF fmt , data, LIST/INFO Writes UTF-8 LIST/INFO chunks Not supported by RIFF INFO Retains fmt , data, and fact only
M4A / MP4 (.m4a) moov/udta/meta/ilst atoms Read-only inspection only Reads covr JPEG/PNG preview Drops udta/meta, shifts stco/co64
MPEG stream (VBR/CBR) Xing, Info, or VBRI frame headers Calculated via frame header scan Uses container ID3v2 tags Leaves compressed MPEG frames untouched

Inspecting Xing and Fraunhofer VBRI headers distinguishes genuine VBR encodes from fixed-rate CBR files across 48 sampled frames. After verifying clean metadata and genuine high-frequency bandwidth on a favorite song snippet, send the audio straight into custom iPhone .m4r ringtone creation for mobile alerts.

Tip: Run a quick frequency cutoff check before archiving “lossless” FLAC downloads. A sharp shelf near 16 kHz combined with a high lossless bitrate flag proves the file came from a lossy MP3 transcode.

Replacing cover art and stripping private tags locally

Music distributors, podcasters, and voice actors regularly swap album thumbnails or wipe private session notes before sending files externally. Processing every header inside browser memory ensures unreleased demos, client voiceovers, and personal metadata never leave your workstation.

Swapping PNG or JPEG artwork without altering audio frames

Click Replace cover art to attach a PNG or JPEG image verified directly by magic bytes (89 50 4E 47 for PNG, FF D8 for JPEG). On MP3 files, artwork writes into an ID3v2.3 APIC Front Cover (0x03) frame while preserving compressed audio payloads intact.

On FLAC tracks, buildFlacPictureBlock reads PNG dimensions directly from image bytes so players display accurate pixel widths and bit depths inside the PICTURE block. Click Remove cover art anytime to detach embedded graphics before clicking Save updated tags and downloading -tagged output.

Wiping ID3, Vorbis, and M4A metadata inside a Web Worker

All binary parsing, container rebuilding, and 2048-point FFT calculations run off the main thread via the MDN Web Workers API reference. Clicking Strip all metadata removes Comment, Year, encoder strings, and cover bytes, reporting exact bytes shaved when saving the -clean file.

On M4A and MP4 tracks, stripM4aMetadata removes udta and meta atoms, shrinks the moov header, and updates every 32 bits stco and 64 bits co64 offset so audio stays playable. If your clip sits inside a video container instead, silence sensitive recordings before sharing clips.

Questions

How does the FFT frequency cutoff inspector detect fake lossless files?

Decoded mono PCM passes through a 2048-point Hann-windowed radix-2 FFT across up to 24 active frames. The analyzer compares high-frequency energy against the 200 Hz to 4000 Hz core band at a minus 42 dB shelf threshold. Real lossless tracks usually carry energy past 18 kHz, whereas re-encoded 128 kbps MP3 upscales drop near 16 kHz.

Which audio containers support tag editing versus lossless stripping?

MP3 files support full editing and stripping across ID3v2.3 tags and APIC cover art. FLAC files edit and strip Vorbis comments and PICTURE blocks, while WAV edits and strips RIFF LIST/INFO text chunks. M4A containers are read-only for text edits here, yet support lossless metadata stripping with updated stco and co64 offsets.

What image formats work for embedded MP3 and FLAC cover art?

The artwork picker accepts PNG and JPEG images, verified from file header bytes before writing. MP3 files store artwork inside an ID3v2.3 APIC frame tagged as Front Cover, while FLAC saves a type 3 PICTURE metadata block with image dimensions. WAV RIFF INFO stores text fields only and omits embedded album images.

Does editing tags or cover art re-encode MP3 or FLAC audio frames?

No. This audio metadata editor slices out existing header or tail tag containers, builds new UTF-16 ID3v2.3 frames or FLAC metadata blocks, and copies the original compressed audio frames byte-for-byte. Audio fidelity, channel layout, and sample counts remain untouched when saving tagged files or stripping metadata.

Why does saving an MP3 convert ID3v2.4 or ID3v1 tags to ID3v2.3?

ID3v2.3 with UTF-16 LE BOM text encoding remains the widest supported metadata version across car stereos, Windows Explorer, macOS Finder, and legacy DJ hardware. Converting older ID3v1 30-byte fields or strict ID3v2.4 headers into one unified ID3v2.3 block prevents truncated titles and mojibake characters.

What happens to hidden encoder notes or iTunes comments when stripping tags?

Clicking Strip all metadata drops leading ID3v2 blocks and trailing 128-byte ID3v1 footers on MP3 files. On WAV it preserves only fmt, data, and fact chunks, while FLAC retains STREAMINFO plus structural blocks like SEEKTABLE. On M4A it removes udta and meta atoms and shifts every sample chunk pointer cleanly.

Updated