Skip to content

PDF booklet maker

Reorder and pair PDF pages into landscape saddle-stitch sheets ready to print double-sided, fold in half and staple.

Drop a PDF here

Only your browser reads them.

How to use PDF booklet maker

  1. Load your PDF. Drop a file onto the tool to see how many folded physical sheets and blank padding slots your document requires.
  2. Select paper and duplex mode. Choose your Printer sheet size and set Two-sided printer flip to Short-edge flip or Long-edge flip.
  3. Adjust binding and spacing. Pick Left spine or Right spine (RTL), then set your Fold gutter, Outer margin, and fold mark preference.
  4. Generate the booklet. Click Make booklet PDF to impose every page pair into landscape two-sided sheets.
  5. Print and bind. Print double-sided at 100% scale without fit-to-page, fold the stack along the center marks, and staple the spine.

Your files are processed on this device and never uploaded. They stay private, and there's nothing to delete afterwards.

How does saddle-stitch booklet imposition pair pages?

Saddle-stitch imposition groups sequential reader pages into folded 4-page signatures so pages read in order after stapling the center spine. Every physical sheet holds 2 pages on the front and 2 on the back, pairing the outermost pages with each other on sheet 1 and working inward toward the center spread.

Padding page counts to multiples of four

Because a single folded sheet always carries 4 booklet panels, a 10-page draft must expand to 12 slots across 3 physical sheets. The preview card calculates this padded total immediately and inserts blank slots at the end of the signature so your cover and back pages land on the outside.

Pages are embedded as scaled Form XObjects inside a 1/72 inch point coordinate grid as defined in the Library of Congress PDF 1.7 (ISO 32000-1) Format Description. Unlike simple sequential grids, saddle-stitching reorders pages; if you only want sequential thumbnails without folding, print standard N-up grid layouts instead.

Reading left-spine and right-spine sheet previews

Before exporting, the options panel displays the exact front and back page pairing for up to the first 3 physical sheets. On an 8-page left-bound zine, Sheet 1 places [p.8 | p.1] on the front and [p.2 | p.7] on the back.

Switching Reading & binding direction to Right spine (RTL) mirrors each pair so page 1 sits on the left panel of the front side. This keeps right-to-left publications, manga zines, and bilingual booklets aligned when folded.

Why do booklet back sides print upside down?

Reverse pages print inverted when your printer’s duplex hardware flips landscape sheets along the long horizontal edge instead of the short vertical axis. Office and home printers frequently default to long-edge portrait binding even when fed landscape booklet PDFs, rotating every even-numbered sheet 180 degrees relative to the front.

Duplex scenario Tool setting Printer dialog setting Result after folding
Standard landscape duplex Short-edge flip Flip on Short Edge Both sides upright
Printer locked to long-edge Long-edge flip Flip on Long Edge Both sides upright
Mismatched flip axes Short-edge flip Flip on Long Edge Back pages upside down
Single-sided manual feed Short-edge flip Manual two-sided Depends on paper reload

Choosing Short-edge flip versus Long-edge flip

When your printer driver lets you pick Short-edge binding, keep Two-sided printer flip set to Short-edge flip (landscape). Every sheet stays upright at 0 degrees rotation, relying on the printer to tumble the paper across its short axis.

If a shared office printer forces Long-edge duplexing, select Long-edge flip (rotate back 180°) here instead. Following the Library of Congress PDF 2.0 (ISO 32000-2) Specification for page transforms, the tool rotates every back sheet by 180 degrees so both sides print upright.

Matching printer driver duplex and 100% scale rules

Always set your print dialog scaling to 100% or Actual Size rather than Fit to Page. Extra scaling shrinks margins unevenly and misaligns front-to-back spine registration, much like mismatched scan batches before you interleave duplex scan pages.

Paper sizes, fold gutters, and outer margins

Choosing the right physical Printer sheet size determines the final folded dimensions of your booklet. Under the W3C CSS Paged Media Module Level 3 standard dimensions, an A4 sheet (595.28 by 841.89 pt) folds neatly into A5 half-sheets, while US Letter (612 by 792 pt) yields half-letter pages.

Printer sheet size Sheet dimensions (mm / in) Folded booklet size Typical use case
A4 (folds to A5) 210 × 297 mm 148.5 × 210 mm Programs, zines, manuals
US Letter (folds to half-letter) 8.5 × 11 in 5.5 × 8.5 in North American handouts
A3 (folds to A4) 297 × 420 mm 210 × 297 mm Full-size catalogs
Tabloid (folds to US Letter) 11 × 17 in 8.5 × 11 in Newsletters, large reports

The Fold gutter defaults to 8 mm (4 mm per half-panel) and adds inner breathing room along the center crease. Meanwhile, the 6 mm default Outer margin keeps content inside typical desktop printer non-printable borders, with a minimum 36 pt (0.5 inch) printable cell guard preventing extreme margins from collapsing the layout.

Enabling Draw center spine fold marks places subtle top and bottom ticks along the vertical centerline so you can score and staple accurately. If your source pages have wildly different page sizes, standardize mixed page dimensions beforehand for uniform scaling across every spread.

Preparing forms and fonts for local booklet export

Imposition runs entirely in browser memory, transferring 0 bytes of your PDF to external servers. Keeping layout generation local ensures sensitive event schedules, church bulletins, and internal training handbooks remain private.

Flattening interactive form fields before imposing

Embedding source pages as static Form XObjects preserves crisp vector text and images, but drops interactive AcroForm fields and clickable link annotations. If your booklet includes filled checkboxes or signature fields, pass it through a PDF form flattener before running imposition.

Tip: Check the imposed booklet’s center spread in a PDF viewer before printing a full batch, especially when combining portrait and landscape source pages in one file.

Processing print-ready PDFs inside your browser

As described in the MDN Web Workers API Documentation, offloading heavy PDF stream embedding to a background Web Worker keeps controls responsive while large multi-page files compile. Once Make booklet PDF finishes, you receive a single landscape PDF ready for duplex printing.

Questions

Why did the back sides of my booklet print upside down?

Most office printers default to long-edge binding, which tumbles landscape sheets head-over-heels on the reverse pass. Either set your printer dialog to short-edge flip or select Long-edge flip in this tool to pre-rotate every back side by 180 degrees.

What happens if my PDF is not a multiple of 4 pages?

Each folded physical sheet holds 4 booklet pages, with 2 on the front and 2 on the back. Any document whose page count is not divisible by 4 is automatically padded with blank slots at the end so the signature folds evenly.

How do I print a saddle-stitch PDF at 100% scale?

In your system print dialog, choose Actual Size or 100% scale and disable Fit to Page. Because the tool already applies your chosen outer margin and fold gutter, extra printer scaling will shrink the layout and shift the center spine.

Does booklet imposition support right-to-left reading order?

Yes. Switching Reading and binding direction to Right spine (RTL) reverses the left and right half-sheet pairing on every front and back side for Arabic, Hebrew, or manga booklets.

What fold gutter should I choose for home stapling?

The default 8 mm fold gutter provides enough inner clearance for thin 8-to-16-page zines and programs. Increase the gutter to 12 mm or 16 mm for thicker stacks so inner text stays clear of the center crease.

Why are interactive form fields missing in the booklet output?

Embedding pages as Form XObjects transfers static vector graphics and text, not interactive AcroForm widgets or clickable link annotations. Flatten interactive forms into static page content before imposing your booklet.

Updated